ECO FRIENDLY Commercial and Residential Metal Roof Painting & Waterproofing
If you are looking for paint or waterproof a residential roof, a barn roof or an industrial roof, we provide a variety of low VOC coating solutions including elastomeric and alkyd coatings.
Whether you need quick and simple barn painting, or meticulous, high quality painting including lots of trim work, we can take care of it for you. No metal roof painting job is too big or too small and you can count on us for a paint job well done. We provide affordable metal roof painting services across Ontario. Let our experienced painters make your house, barn or factory roof look fantastic. AREAS WE SERVICE; Ottawa, Nepean, Gloucestor, Kanata, Orleans, Kemptville, Carleton Place, Smiths Falls, Mississippi Mills Perth, Prince Edward County, Brockville, Kingston, Prescott, Cornwall ,Russell, Vars, Rockland, Hawkesbury. |
|
Commercial / residential Roof COATING.
10-20 Year Warranty
watch Elastomeric Roof Coating-Video
METAL ROOF OTTAWA INC are FACTORY DIRECT REPS for NaturaSeal NovaSet® R250 ISW - a spray-applied, seamless elastomeric roofing membrane developed by NaturaSeal Distribution Inc.
Our fluid-applied membrane utilizes advanced thermo-active polymerized modified emulsion (PME) technology to create a monolithic, fully bonded, and self-healing surface. It is designed for various high-performance waterproofing applications, including metal roofs, cool roofs, single-ply roofs, built-up roofs (BUR), SBS modified bitumen, concrete surfaces, and re-roof assemblies that meet Miami-Dade County Rating (click for info)
BEST QUALITY AND BEST WARRANTY IN THE COMMERCIAL ROOF COATING INDUSTRY
We offer highly competitive rates on commercial elastomeric roof coating projects starting at:
From $5.95 /Sq Ft with 5 -20 Year Renewable Commecial Roof Warranty ( 5,000 sq ft Plus )
Key Features:
Application Guidelines:
Our fluid-applied membrane utilizes advanced thermo-active polymerized modified emulsion (PME) technology to create a monolithic, fully bonded, and self-healing surface. It is designed for various high-performance waterproofing applications, including metal roofs, cool roofs, single-ply roofs, built-up roofs (BUR), SBS modified bitumen, concrete surfaces, and re-roof assemblies that meet Miami-Dade County Rating (click for info)
BEST QUALITY AND BEST WARRANTY IN THE COMMERCIAL ROOF COATING INDUSTRY
We offer highly competitive rates on commercial elastomeric roof coating projects starting at:
From $5.95 /Sq Ft with 5 -20 Year Renewable Commecial Roof Warranty ( 5,000 sq ft Plus )
Key Features:
- Instant-Set Technology: Allows for rapid application with early rain resistance, reducing potential delays due to weather conditions.
- Eco-Friendly Composition: The product is sustainable, odorless, and has low volatile organic compounds (VOC), making it environmentally friendly.
- Ponding Water Resistance: Enhances roof longevity by effectively resisting water accumulation.
- Flexibility: Ideal for complex transitions due to its flexible polymer composition.
- High Reflectivity: Offers a reflective surface that contributes to energy conservation and potential savings. Continental Materials
- UV and Weather Resistance: Provides durability against ultraviolet rays and various weather conditions.
- Seamless Application: Forms a monolithic, fully bonded, and self-healing membrane, eliminating vulnerabilities associated with seams and joints.
Application Guidelines:
- Surface Preparation: We ensure all substrates are clean and free from debris, dirt, and mildew.
- Weather Conditions: Avoid application during rain or when temperatures are below 40°F (5°C). Continental Materials
- Drying Time: The membrane is firm to the touch within one minute at 20°C (68°F) and fully cures in 24 to 48 hours, depending on temperature and relative humidity. Continental Materials
Product Overview – NovaSet® R250 ISW
NovaSet® R250 ISW is an advanced spray-applied, seamless roofing membrane developed by NaturaSeal Distribution Inc. This high-performance coating utilizes Thermo-Active Polymerized Modified Emulsion (PME) technology to create a fully bonded, monolithic, and self-healing waterproof layer. Engineered for durability and versatility, NovaSet R250 ISW is suitable for a wide range of substrates including metal roofs, BUR, SBS modified bitumen, single-ply membranes, and concrete. It features instant-set curing, superior UV and ponding water resistance, high solar reflectivity, and low VOC content, making it both effective and environmentally friendly. Ideal for commercial, industrial, and institutional roofing applications, this fluid-applied membrane is formulated for long-term protection and energy efficiency.
Technical Data Sheet (TDS):
Download NovaSet® R250 ISW TDS (PDF)
Safety Data Sheet (SDS):
Download NovaSet® R250 ISW SDS (PDF)
Product Overview – NovaSet® R250 ISW
NovaSet® R250 ISW is an advanced spray-applied, seamless roofing membrane developed by NaturaSeal Distribution Inc. This high-performance coating utilizes Thermo-Active Polymerized Modified Emulsion (PME) technology to create a fully bonded, monolithic, and self-healing waterproof layer. Engineered for durability and versatility, NovaSet R250 ISW is suitable for a wide range of substrates including metal roofs, BUR, SBS modified bitumen, single-ply membranes, and concrete. It features instant-set curing, superior UV and ponding water resistance, high solar reflectivity, and low VOC content, making it both effective and environmentally friendly. Ideal for commercial, industrial, and institutional roofing applications, this fluid-applied membrane is formulated for long-term protection and energy efficiency.
Technical Data Sheet (TDS):
Download NovaSet® R250 ISW TDS (PDF)
Safety Data Sheet (SDS):
Download NovaSet® R250 ISW SDS (PDF)
Novaset 250 isw energy savings
The solar reflectance (also known as albedo) of white elastomeric roof coatings typically ranges from:
🔹 0.70 to 0.88 (or 70% to 88%)This means the coating reflects 70–88% of the sun’s radiation, significantly reducing roof surface temperatures and improving energy efficiency.
✅ Typical Product Example:
🔹 0.70 to 0.88 (or 70% to 88%)This means the coating reflects 70–88% of the sun’s radiation, significantly reducing roof surface temperatures and improving energy efficiency.
✅ Typical Product Example:
- Initial Solar Reflectance: ~0.85 (85%)
- Aged Solar Reflectance (3-year weathering): ~0.75 to 0.80
- ENERGY STAR® requires:
- Initial Reflectance ≥ 0.65
- 3-Year Aged Reflectance ≥ 0.50
- Initial Reflectance ≥ 0.65
- CRRC (Cool Roof Rating Council) certified products often list:
- Initial SR: 0.84–0.87
- Emissivity: 0.87–0.90
- Initial SR: 0.84–0.87
Residential roof painting - 5 year warranty
Scope of work- RESIDENTIAL METAL ROOF PAINTING
Approved 📝 Scope of Work (SOW) Project Title: Residential/Agricultural Metal Roof Restoration
Method: Hand Roller/Brush Application
Prepared for: [Homeowner/Farm Owner Name]
Location: [Insert Address]
Date: [Insert Date]
Prepared by: [Insert Approved Paint Sub-Contractor/Company Name]
1. 🔍 Project OverviewThe objective of this project is to restore and protect the existing metal roofing system on a residential or agricultural structure by cleaning, repairing, and applying a high-performance coating system. This process will extend roof life, improve weather resistance, and enhance curb appeal.
2. 💦 Cleaning & Surface Prep
3. 🔩 Fastener & Minor Repairs
4. 🎨 Coating Application – Hand Roller/Brush Method
5. ✅ Final Inspection & Cleanup
6. 🛡️ Warranty & Maintenance
7. 🦺 Safety & Environmental Compliance
Method: Hand Roller/Brush Application
Prepared for: [Homeowner/Farm Owner Name]
Location: [Insert Address]
Date: [Insert Date]
Prepared by: [Insert Approved Paint Sub-Contractor/Company Name]
1. 🔍 Project OverviewThe objective of this project is to restore and protect the existing metal roofing system on a residential or agricultural structure by cleaning, repairing, and applying a high-performance coating system. This process will extend roof life, improve weather resistance, and enhance curb appeal.
2. 💦 Cleaning & Surface Prep
- Power Wash Entire Roof Surface:
- Remove dirt, pollen, animal residue, algae, loose paint, and debris.
- Use a minimum 3000 PSI pressure washer with an environmentally safe roof cleaner.
- Ensure all surfaces are dry before paint application (typically 24 hours drying time).
- Rust Spot Prep:
- Hand-scrape, wire-brush or sand light rust to bare metal.
- Apply spot primer (ProCryl® Universal Primer) to rusted areas to prevent further corrosion.
3. 🔩 Fastener & Minor Repairs
- Screw Maintenance:
- Inspect and replace any stripped, loose, or corroded screws with corrosion-resistant roof screws (galvanized or stainless).
- Tighten existing fasteners and apply roofing sealant over exposed heads for leak prevention.
- Minor Repairs:
- Seal cracks, seams, and minor penetrations using elastomeric roof sealant compatible with the coating system.
- Inspect and seal around vents, chimneys, skylights, or pipe flashings as needed.
4. 🎨 Coating Application – Hand Roller/Brush Method
- Primer (as needed):
- Apply 1 coat of ProCryl® Universal Primer to bare or spot-treated metal.
- Let dry per manufacturer’s instructions before topcoating.
- Topcoat – 2 Coats:
- Apply 2 full coats of one of the following:
- Sher-Cryl™ HPA: Durable acrylic finish ideal for homes and barns where color and sheen are important.
- Uniflex® Elastomeric Roof Coating: Flexible, reflective, waterproof coating ideal for barns, sheds, and utility buildings.
- Application via hand roller and brush ensures detail work around screws, seams, and edges.
- Maintain even coverage (~1.0–1.5 gal/100 sq ft per coat depending on substrate).
- Follow full drying and recoat times (typically 2–4 hours between coats).
- Apply 2 full coats of one of the following:
5. ✅ Final Inspection & Cleanup
- Ensure full, even coverage and proper adhesion across all surfaces.
- Touch up thin spots or missed areas.
- Remove masking, tape, debris, and jobsite materials.
- Leave the property clean and free of waste.
6. 🛡️ Warranty & Maintenance
- Provide a limited workmanship warranty (typical 2–5 years depending on agreement).
- Recommend re-inspection every 2–3 years.
- Supply homeowner/farm owner with:
- Product Data Sheets (PDS)
- Application summary
- Maintenance guide
7. 🦺 Safety & Environmental Compliance
- Use of appropriate fall protection and PPE for all workers.
- Safe handling and disposal of coatings, primers, and washwater.
- Ensure protection of plants, animals, livestock areas, and water systems.
Good - Better- Best METAL Roof coatings FOR RESIDENTIAL AND AGRICULTURAL STEEL ROOFS
GOOD - Sherwin Williams Pro Industrial DTM Acrylic Coating with Built In Primer and Rust Protector
2 Coats Hand Applied with 5 Year Workmanship Warranty - From $3.95/sq. ft
This high-performance, water-based acrylic coating is designed for both interior and exterior applications. It offers excellent weathering and moisture resistance, making it ideal for protecting metal roofs.
The coating is available in Egg-Shell, Semi-Gloss, and Gloss finishes, all with fewer than 50 grams per liter VOCs. Additionally, SW- DTM resists flash rust and early rust, providing corrosion protection.
For detailed specifications, you can refer to the Pro Industrial DTM Acrylic Coating PDF.
BETTER - Sherwin-Williams ProCryl® Universal Primer PLUS Sherwin-Williams SureCryl® Topcoat
2 Coats Hand Rolled. Primer Coat PLUS Topcoat with 5 Year Workmanship Warranty - From $4.95/sq. ft
PRIMER SPECIFICATION
Sherwin-Williams ProCryl® Universal Primer is a water-based, acrylic primer specifically designed for application to a variety of metal substrates, including steel and and aluminum roofing and incorporates Sherwin-Williams' protective and marine primer technology.
🔧 Key Features of ProCryl:
- Direct-to-Metal (DTM): Bonds directly to clean metal surfaces without the need for a separate primer.
- Rust Inhibitive: Contains corrosion-resistant pigments for excellent protection against rust.
- Fast Drying: Touch dry in 30 minutes; can usually be top-coated quickly.
- Low VOC: Environmentally friendly and compliant with most regulations.
- Water-Based: Easier cleanup, lower odor, and safer handling than solvent-based primers.
- Color: Typically available in red oxide and gray.
- Commercial or industrial steel structures
- Railings, metal doors, roofing and trim
- Carbon steel
- Galvanized steel
- Aluminum
- Concrete and masonry (in some cases)
- Volume Solids: ~38%
- VOC: <100 g/L
- Dry to touch: ~30 minutes
- Recoat window: 2–4 hours (depending on conditions)
TOPCOAT SPECIFICATION
Sher-Cryl™ HPA High Performance Acrylic. A high-performance, ambient-cured, one-component acrylic coating designed for both interior and exterior applications. It offers excellent durability, chemical resistance, and aesthetic appeal across various substrates.
🔧 Key Features:
- Chemical Resistance: Withstands exposure to a variety of chemicals, enhancing longevity.
- Humidity Resistance: Performs well in high-humidity environments without compromising integrity.
- Corrosion Resistance: Protects metal substrates from corrosion, extending the lifespan of the coated surfaces.
- Flash Rust/Early Rust Resistance: Minimizes rust formation during the early stages of curing.
- Fast Drying: Facilitates quicker recoating and project completion.
- Outstanding Application Characteristics: Provides smooth application with various methods, including spraying, rolling, or brushing.
🧱 Surface Compatibility:
- Steel: Requires appropriate primer; consult specifications for options.
- Aluminum: Can be applied directly or with a primer, depending on exposure conditions.
- Galvanized Surfaces: Adheres well with or without a primer, based on the specific requirements.
- Previously Painted Surfaces: Can be applied over existing coatings after ensuring compatibility and proper surface preparation.
🧪 Technical Specs Snapshot:
- Sheens Available: Gloss, High Gloss, Semi-Gloss.
- Volume Solids: Varies by color and sheen; refer to the Product Data Sheet for specific values.
- VOC Content: Compliant with relevant regulations; exact values depend on the specific product variant.
- Dry to Touch: Typically within 30 minutes under standard conditions.
- Recoat Time: Approximately 2 hours, depending on environmental factors.
- Coverage: Approximately 350–400 sq ft per gallon, varying with substrate and application method.
📋 Typical Uses:
- Commercial and Institutional Buildings: Ideal for roofs walls, doors, and trim.
- Industrial Facilities: Suitable for structural steel, roofs, equipment, and machinery.
- Healthcare Facilities: Appropriate for areas requiring durable and cleanable surfaces.
- Educational Institutions: Excellent for classrooms, hallways, and common areas.
- Hospitality and Retail Spaces: Provides an attractive and resilient finish for high-traffic areas.
For detailed specifications, application guidelines, and safety information,
please refer to the Product Data Sheet (PDS).
BEST - Sherwin-Williams Uniflexl® Elastomeric Roof Coating
2 Coats Hand Applied with 5 Year Workmanship Warranty. From $5.95/sq. ft
🏗️ Uniflex® Elastomeric Roof CoatingA high-performance, water-based acrylic roof coating designed for waterproofing and energy efficiency on a wide range of roof types. It forms a flexible, durable membrane that resists cracking, peeling, and UV degradation.
🔧 Key Features:
- Elastomeric Flexibility: Expands and contracts with roof movement without cracking.
- Waterproofing: Creates a seamless, weather-resistant barrier against rain and moisture.
- Cool Roof Technology: Bright white finish reflects UV rays, reducing heat buildup and helping lower cooling costs.
- UV Resistant: Resists degradation and chalking from prolonged sun exposure.
- Energy Saving: Reduces surface temperatures and can lower building energy consumption.
- Easy Application: Can be sprayed, rolled, or brushed on.
- Environmentally Friendly: Low VOC, water-based formula.
🧱 Surface Compatibility:
- Metal roofs
- Concrete
- Urethane foam
- Modified bitumen (smooth and granulated)
- BUR (Built-Up Roofing)
- Single-ply membranes (with appropriate primer)
- Previously coated surfaces (must be clean and sound)
🧪 Technical Specs Snapshot (for Premium White Elastomeric):
- Volume Solids: ~52%
- VOC: <50 g/L
- Reflectivity: ≥85% (initial white)
- Tensile Strength: 250 psi (ASTM D2370)
- Elongation: 250–300% (ASTM D2370)
- Dry Time: 2–4 hours to touch (longer for recoating depending on humidity/temp)
- Application Temp: Minimum 50°F (10°C) and rising
📋 Typical Uses:
- Commercial and residential roofing
- Maintenance coating for aged roofs
- Reflective coating for energy savings
- Extending roof lifespan
Product Data Sheets (PDS) for both Uniflex® Elastomeric Roof Coating